ISIE 2023 Schedule

Organizer(s) and Presenter(s):
Christoph Hackl, Hochschule München (HM) University of Applied Sciences, Germany

Brief description:
In this tutorial, a unified theory for generic loss minimization by optimal feedforward torque control (OFTC) of electrical machines is presented which allows to analytically compute (i) the optimal direct and quadrature reference currents for all operating strategies, such as MTPC, MC, FW, MTPV [or MTPF], and, in particular, Maximum Torque per Losses (MTPL, minimizing copper & iron losses), (ii) the transition points indicating when to switch between the operating strategies due to speed, voltage and/or current constraints. The unified theory is applicable for all operation modes and allows to consider copper and iron losses and arbitrary machine nonlinearities. The analytical solutions allow for an (almost) instantaneous selection of the actual operation strategy and the computation of its corresponding optimal reference currents. Numerical methods (approximating these solutions only) are no longer required. All optimization problems, their respective constraints, and the computation of the intersection point(s) of voltage ellipse, current circle, or torque, MTPL, MTPC, MTPV, MTPF hyperbolas are reformulated implicitly as quadrics (quadratic surfaces). The proposed theory is suitable for any electrical machine. Most recent results are presented which utilize artificial neural networks (ANN) which allow to solve the OFTC problem also analytically but even faster.

Organizer(s) and Presenter(s):
Dorin O. Neacșu, Technical University of Iasi, Romania

Brief description:
Since most dc/dc power stages for computer or telecom applications are currently optimized as modules by manufacturers, the effort in development moves towards controller implementation. While conventional feedback control design methods in frequency domain (lead-lag, or PI-D) are well mastered in industry, with numerous digital or power IC implementation options, this tutorial proposes and demonstrates a major leap forward with the use of State Space based design. The tutorial demonstrates that a State Space based controller is physically equivalent to a series cascaded control set up with an outer voltage loop and an inner either peak or average current loop. An in-depth presentation of the method’s actual simplicity, rich in worked examples for either analog or digital implementation, opens this topic to any introductory to intermediate audience.

Organizer(s) and Presenter(s):
Sandro Guenter, The University of Nottingham, Ningbo, China

Brief description:
Multiple-Active-Bridge converters are an interesting device to interlink several sources/sinks or busses within complex power networks. For instance, they could be used in solid state transformers or More Electric Aircraft DC-microgrids. However, modeling and control are more difficult than for the dual active bridge due to the more complex structure. Thus, this tutorial aims to guide attendees through the build process of an impedance model of a quadruple-active bridge converter and the related control. Attendees will learn how to derive the mathematical model of the converter and how to implement the control.

Organizer(s) and Presenter(s):
Mohan V. Aware, Visvesvaraya National Institute of Technology, Nagpur, India

Brief description:
Multi-phase motor drive systems have attracted much attention in recent years due to some inherent advantages which they offer when compared to the three-phase counterpart. The new developments in areas such as electric ship propulsion, more-electric aircraft, electric and hybrid electric vehicles, electric locomotive traction and renewable electric energy generation has invoked the interest amongst the researchers. These applications invariably require the electric machine, which is traditionally a three-phase motor. The multi-phase machines with power electronic based converters along with advanced control strategies are creating niche technological advancement to improve reliability and energy efficiency of these energy conversion systems. This tutorial provides new outlook and expectation from the industrial point of view.

Organizer(s) and Presenter(s):

Alex Norta, Tallinn University, Estonia
Vimal Dwivedi, University of Tartu, Estonia and Queens University, Belfast, UK
Raimundas Matulevičius, University of Tartu, Estonia
Mubashar Iqbal, University of Tartu, Estonia

Brief description:
The tutorial will cover the intersection of blockchain DApp development, artificial intelligence (AI), and cyber security. It is offered to academic researchers, practicing engineers, and professionals in the industry who want to learn about the latest advances in these three areas and how they can be combined to create cutting-edge solutions. The fundamental concepts of blockchain, DApps, AI and cyber security will be introduced, explaining how these technologies work and how they can be integrated to build secure and efficient systems. The tutorial will delve also into the practical aspects of developing blockchain DApps with AI and cyber security, discussing the challenges of integrating AI into blockchain DApps and how to overcome them. It will explore the best practices for ensuring the cyber security of blockchain DApps and how to avoid common security pitfalls. Real-world examples and case studies will be used throughout the tutorial to illustrate concepts and techniques.

Organizer(s) and Presenter(s):

Daswin De Silva, La Trobe University, Victoria, Australia
Nishan Mills, La Trobe University, Victoria, Australia
Gihan Gamage, La Trobe University, Victoria, Australia

Brief description:
Artificial Intelligence (AI) is coming of age. It is gradually becoming embedded in industrial systems and settings. Following several decades of expedient development and adoption of Artificial Narrow Intelligence (ANI); an intelligence that is domain-specific and requires technical operating expertise, we are now witnessing the rise of Artificial General Intelligence (AGI), in what is termed generative AI. Although these early developments of generative AI are far from the original definition of AGI, they represent a paradigm shift in the intelligence of machines, a transition from narrow to general. This disruptive force of AI is manifested in the current wave of Generative AI models, such as ChatGPT, LLaMA, Bard and Sparrow. ChatGPT is the fastest-growing consumer application in human history, reaching a hundred million active users just two months after its launch. In this tutorial, participants will learn the theory and practice of using generative AI models and libraries for the development of industrial applications and solutions. The tutorial begins by exploring the structural elements of Generative AI models, transformers, hyper-parameters, transfer learning and comparison to standard machine learning algorithms, followed by the application of generative AI for the design, development and evaluation of industrial applications. Participants will develop hands-on skills in using generative AI libraries and acquire a practical understanding of “prompt engineering” for diverse industrial settings. The learning outcomes of this workshop are; the theoretical foundations of Generative AI - when to use and in which settings, the design and development of Generative AI models, prompt engineering for diverse use cases and rapid prototyping to evaluation of a suitable Generative AI solution.

Requirements:
Participants will access Google Collaboratory using a Gmail account. A laptop with an Internet browser and a stable Internet connection is mandatory.

Chairs:
Christoph Hackl
Sertac Bayhan

ISIE23-000026 Analysis and Modeling of Switched-Capacitor Converters with Parasitic Inductance

ISIE23-000040 Artificial Neural Network Based Thermal Model for a Three-Phase Medium Frequency Transformer

ISIE23-000043 Three-phase EV Charging System Based on Matrix Converters with Improved Current Commutation

ISIE23-000044 A Novel Sensorless Control Method for Three-Phase Active Front End Rectifiers

ISIE23-000367 Fuzzy Inferenced Impedance Matching for the SIMO-WPT Scheme

Organizer(s) and Presenter(s):

Pedro H. J. Nardelli, Lappeenranta-Lahti University of Technology, Finland
Daniel G. Rojas, Lappeenranta-Lahti University of Technology, Finland
Nicola Marchetti, Trinity College Dublin, Ireland
Harun Siljak, Trinity College Dublin, Ireland
Indrakshi Dey, Walton Institute for Information and Communications Science, Ireland

Brief description:
Agent based modelling (ABM) is a method of implementing computational models for a collection of relatively autonomous and heterogeneous nodes, whose behavior can be defined with a limited number of simple rules. ABM can account for a massive number of communicating nodes with a potentially infinite number of physical and logical interactions between them. However, ABM always looks for a realistic way to define interactions among the nodes, and we can indeed consider the agents as part of a given cyberphysical system (CPS) characterized by three constitutive layers. If both nodes and links are considered as agents, each of them will have their own behavioral pattern and will provide information about the dynamics of the formed network. Agent-based models can also characterize interactions between the heterogeneous agents and generate effects like clustering, coalition, communication or opportunistic resource access. Using the network effects generated, the analysis of Industrial CPSs based on ABM has the potential of establishing itself as one of the most efficient tools for extracting network topologies using physical, functional and resource-based inter-relationships between the agents at much lower complexity and energy requirements than either ML-based techniques or traditional statistical modelling. This tutorial will present a detailed theoretical conceptualization of the application of ABM for modelling the dynamics of industrial CPSs, and enabling information processing and decision-making. It will serve as a key knowledge-transfer tool for mitigating the risks of the cyber-enabled dynamics that are reaching several domains like energy and infrastructure, construction and manufacturing industries, and transportation.

Chairs:
Pranay Jhunjhunwala
Edivan Laercio Carvalho

9:30-9:35 ----- Welcome Words from IES SYP-AC --- Pranay Jhunjhunwala, Edivan Laercio Carvalho
9:35-10:00 ---- Keynote 1: Edivan Laercio Carvalho
10:00-10:05 --- Wen Chun Huang -- MQLINK: A Scalable and Robust Communication Network for Autonomous Drone Swarms
10:05-10:10 --- Kazi Jabed Akram -- Capacitive Sensor-based Smart Water Tap: A Feasibility Study
10:10-10:15 --- Víctor Zárate -- Fruit Detection and Classification Using Computer Vision and Machine Learning Techniques
10:15-10:20 --- Shimeng wu -- Attack prevention and detection for cyber-physical systems based on coprime factorization technique
10:20-10:25 --- Shourya Bose -- On LinDistFlow Model Congestion Pricing: Bounding the Changes in Power Tariff

Chairs:
Claude Delpha

ISIE23-000004 Stator Intermittent Ground Fault Detection in High-Impedance Grounded Generators

ISIE23-000020 Development of High Voltage Switched Reluctance Starter/Generator System for More Electric Aircarft

ISIE23-000027 A Novel Indicator-Based On-line Diagnosis Technique of Inter-Turn Short Circuit Faults in Asymmetrical Six-Phase Induction Machines, Adopting a Model Predictive Controller

Chairs:
Huei-Yung Lin

ISIE23-000075 Online Object Tracking on Multiple Cameras with Completely Overlapping Views

ISIE23-000086 Design and characterization of an EOG signal acquisition system based on the programming of saccadic movement routines

ISIE23-000334 Using object detection for a robust SLAM in dynamic environments

Chairs:
David Molinero
Arun Narayanan

ISIE23-000045 A generic Lyapunov-based Observer for Double-Star-Chopper-Cell/Bridge-Cell Modular-Multilevel-Cascade-Converters

ISIE23-000047 Mitigation of Current Ringing Effects in a Dual Active Bridge Converter

ISIE23-000065 Motion Control by Wireless Transmission of Power Packets: Experimental Verification with Multi-finger Robot Hand

Chairs:
Bruno de Oliveira e Sousa
Christoph Hackl

ISIE23-000078 A Predictive Control based Scheme for Maximum Power Extraction of PMSG based Wind Turbine Systems

ISIE23-000099 Reinforcement Learning based Coordination of Virtual Inertia Provision from Inverter-dominated Distribution Grids

ISIE23-000008 The choice of components for the construction of a power inverter of 44 kW WPT system

Chairs:
Sandeep Patil
Mobina Pouresmail

ISIE23-000122 A Resilient Framework for 5G-Edge-Connected UAVs based on Switching Edge-MPC and Onboard-PID Control

ISIE23-000389 Compensating Delays for Precise and Real-time ROS Cloud Robotics Localization

Chairs:
Chen-Wei Yang
Hadi Tarzamni

ISIE23-000025 Evaluation of Isolation and Communication Mechanisms for Real-Time Containers

ISIE23-000054 A Real-Time Digital Twin Approach on Three-Phase Power Converters

ISIE23-000118 Component Test – Test Strategies with Asset Administration Shells

Chairs:
Seiichiro Katsura

ISIE23-000041 Application of reinforcement learning for energy consumption optimization of district heating system

ISIE23-000098 A user-extensible solution for deploying fog computing in industrial applications

Chairs:
Larisa Dunai
Jinhua She

ISIE23-000140 Effective Severity Assessment of Parkinson's Dis-ease with Wearable Intelligence using Free-living Environment Data

ISIE23-000206 Proposal and implementation of k-anonymization method for data insertion and deletion

ISIE23-000226 Presentation of Underwater Sensation by Drag in Knee Motion with a Lower Limb Exoskeleton Using MR Fluid Brakes

Chairs:
Pranay Jhunjhunwala
Edivan Laercio Carvalho

11:00-11:05 --- Marcell Balogh -- Extending Edge-Based Mobile Robot Navigation with Social Awareness
11:05-11:10 --- Jun Hitokuwata -- Fault-Tolerant Active Neutral-Point-Clamped Multilevel Inverter Maintaining Output Voltage at Failure
11:10-11:15 --- Tatiana Liakh -- Methods of data streaming from IEC 61499 applications to Cloud storages
11:15-11:20 --- Sukrashis Sarkar -- A DC-DC Modular Multilevel Converter Topology with Single Arm for MVDC Railway Application
11:20-11:25 --- Umer Sohail -- A Novel Technique to Mitigate the Overlap-Time Effect in Current Source Inverters
11:30-11:50 --- Keynote 2: Ronal Bejarano Rodriguez
11:55-12:15 --- Keynote 3: Pranay Jhunjhunwala
12:15-12:30 --- Discussions, Interactions, and Socialising

Location : Sief @ Dipoli

Keynote 1: Real time data, privacy, profit, and the distributed grid

Liana Jo Ault
Venture General Manager for Energy Innovation, Nokia, UK

Abstract:
In this topic we will investigate how distributed generation has changed the way we use data. We will discuss the impact privacy and profit have on the use of our data, the pitfalls and successes of existing solutions and challenges yet to be resolved.

Speaker Bio:
Liana is a Venture General Manager for Energy Innovation at Nokia. Leading a new Nokia venture focused on digital platforms supporting optimization of flexible and renewable assets, her team focuses on commercialization in start-up environment.

Liana has extensive experience working with power utilities and industrial customers on new business models and industry trends. She likes to ask ‘What If?’ and is passionate about encouraging the next generation of sustainable engineers to challenge the status quo, ask the tough questions and find new innovative solutions.

Chairs:
Oscar Lucia
Khaled Laadjal

ISIE23-000066 Analysis and Mitigation of Low-Order-Harmonic Neutral-Point Voltage and Current Ripples in Five-Level NPC-Based Inverters

ISIE23-000070 Load-Independent Class E-1 Voltage-Driven Synchronous Rectifier

ISIE23-000076 Passive Damping Stabilization for Constant-Power Loaded Boost Converter

Chairs:
Seppo Borenius

14:30-14:50 Mikko Heikkilä -- Beckhoff Automation : "The importance of services in the success of automation product development projects"
14:50-15:10 Mika Skarp -- Cumucore Oy : "Software defined factory - requirements to industrial communication infrastructure"
15:10-15:30 Greg Boucaud -- UniversalAutomation.Org : "Unleashing industry 4.0 thanks to hardware independent automation apps"

Chairs:
Firdausa Ahmed
Marko Hinkkanen

ISIE23-000029 Segmentation Effects in the Modular HVDC Offshore Wind Generator and its Impact on Losses

ISIE23-000071 Nonlinear Three-Phase Reluctance Synchronous Machine Modeling With Extended Torque Equation

ISIE23-000073 A Coupled Electromagnetic-thermal Dynamic Model for Wind Turbine Permanent Magnet Synchronous Generator Operation Analysis

ISIE23-000113 Multiparameter Estimation Accuracy Improvement for PMSMs Using a Constriction Coefficient-Based Particle Swarm Optimization

ISIE23-000129 A simple disturbance observer for stator flux linkage estimation of nonlinear synchronous machines

ISIE23-000130 Artificial neural network based optimal feedforward torque control of electrically excited synchronous machines

Chairs:
Alin Tisan
Marta Marron-Romera

ISIE23-000011 Bag-of-Functions Denoising: Extracting main components in time series

ISIE23-000097 Age Group Recognizer based on Human Face Supporting Smart Digital Advertising Platforms

ISIE23-000110 A Noninvasive Smart Chair System for Monitoring Postures in Sedentary Workers

ISIE23-000114 Gaze orientation to evaluate object interaction in human functional assessment

ISIE23-000184 Semantic-Based Image Steganography with Deep Convolutional Network

Chairs:
Kim Fung Tsang
Haibo Cheng

ISIE23-000298 An Efficient and Secure DAG-based LoRaWAN System

ISIE23-000005 Artificial Intelligence-Based Diagnosis of Hydraulic Centrifugal Pumps Using Vibration Sensor: Feature Extraction and Failure Classification

ISIE23-000103 PestDSS: An Integrated Decision Support System for Sustainable Pest Management in Agriculture

ISIE23-000033 Temporal bi-index

Chairs:
Bruno de Oliveira e Sousa
Christoph Hackl

ISIE23-000009 Hardware-in-the-loop modeling of three-phase T-type neutral point clamped voltage source inverter for battery charging stations

ISIE23-000035 Combining virtual synchronous machine and feedforward torque control for doubly-fed induction machine based wind energy conversion systems

ISIE23-000067 Three-level four-leg Voltage Source Inverter modulation techniques comparison for smart grids

ISIE23-000072 TL-PVCNN: a Point Cloud Semantic Segmentation Framework on Transmission Line Scene

ISIE23-000094 On LinDistFlow Model Congestion Pricing: Bounding the Changes in Power Tariff

Chairs:
Danilo Caceres Hernández
Majid Sorouri

ISIE23-000275 Numerical Algorithm for Processing Phase Images for Measuring Three-Dimensional Geometry of Dynamic Objects by Phase Triangulation Methods

ISIE23-000276 Application of narrowband optical filtering of Doppler signals in aerodynamic and hydrodynamic experiments

ISIE23-000315 A Robust Self-Organizing UAV Swarm with Loss Compensation Strategies for Efficient Mission Execution

ISIE23-000377 Autonomous Drone Swarm with Bionic Control

ISIE23-000366 An Image Location System Based on SIFT Algorithm to Alternative to GPS

ISIE23-000087 Fruit Detection and Classification Using Computer Vision and Machine Learning Techniques

Chairs:
Zaixin Song
Chunhua Liu

ISIE23-000069 Deadbeat-Direct Complex Torque Control for Permanent Magnet Synchornous Motors

ISIE23-000089 Design of A Novel Dual Three-Phase Dual Stator Axial Flux Permanent Magnet Machine with Mechanical Offset

ISIE23-000091 Power Quality Disturbance Identification Algorithm Based on Empirical Wavelet Transform And Time-Domain Kurtosis Feature Analysis

ISIE23-000117 Improved Predictive Control for Dual Motors Drives with Phase Angle Regulation

ISIE23-000128 Comparison and Performance of Five-Phase SVPWM Overmodulation Strategies

ISIE23-000156 Common-Mode Voltage Reduction-Based Space Vector Modulation Strategy for Three-Phase Two-Level Inverter with Delta-Connected Loads

Chairs:
Hadi Tarzamni
Khaled Laadjal

ISIE23-000090 Combined Operation of CCM and DCM for an Active Buffer DAB AC-DC Converter

ISIE23-000092 A Low Passive Count Redundant Four-Level Inverter Topology

ISIE23-000100 Multifunctional Grid-Forming Cascade Control for Converters Equipped with an LCL Filter

ISIE23-000101 A novelty proposal of Grid-Forming Multi-Cell DC-AC Converter for Single-Phase Railway Catenary Systems

Chairs:
Arun Narayanan
Luca Tendera

ISIE23-000168 An Extension of the Kinetic Battery Model for Optimal Control Applications

ISIE23-000215 Design of a Thermal Battery Dummy with Integrated Sensor Node

ISIE23-000212 Degradation Detection of Series-Connected Li-ion based ESS via Time Domain Reflectometry

ISIE23-000202 Three-Dimensional Model of a cylindrical Lithium-Ion Cell - Influence of Cell Design on State Imbalances and Fast-Charging Capability

Chairs:
Sertac Bayhan
Jiarui Zhang

ISIE23-000134 Discrete-time Observers for a Mechatronics System with PID Controllers Tuned Using SMA

ISIE23-000137 Dynamic path planning in human-shared environments for low-resource mobile agents

ISIE23-000139 PI and Super Twisting Sliding Mode with Smith Predictor Control Structures for SMA Actuators

ISIE23-000151 Angle Control Using Corona Discharge Considering Voltage Range Limitations

ISIE23-000387 MQLINK: A Scalable and Robust Communication Network for Autonomous Drone Swarms

Chairs:
Alexander Fay
Yingyue Zhang

ISIE23-000200 Deep Q-Learning versus Proximal Policy Optimization: Performance Comparison in a Material Sorting Task

ISIE23-000240 Free Software and Open-Source Hardware for Industrial Automation

ISIE23-000271 A Semantic Model to Express Process Parameters and their Interdependencies in Manufacturing

ISIE23-000290 A Methodology for Integrating Asset Administration Shells and Multi-agent Systems

ISIE23-000295 Contract-Based Design for Low-Code Development in Industrial Edge Applications

ISIE23-000296 Process-Product-Resource based Requirement Model for Discrete Manufacturing Systems

Chairs:
Luis Gomes
Sandeep Patil

ISIE23-000241 Reliability Estimation of Split DNN Models for Distributed Computing in IoT Systems

ISIE23-000368 Developing a Test Suite for Evaluating IEC 61499 Application Portability

ISIE23-000384 Hardware support for Static-Priority Stack Resource Policy based scheduling

ISIE23-000393 Unified Digital Framework in Marine Applications

ISIE23-000398 Analysing navigation paths in constrained graphs using Petri nets

ISIE23-000399 Supporting a .csv-based Workflow in MongoDB for Data Analysts

Chairs:
Larisa Dunai
Jinhua She

ISIE23-000231 Artificial-Voice-Based Conversational Lecture Video Clips for Flipped Classroom

ISIE23-000303 An Explainable Artificial Intelligence Approach for Force Estimation from Surface-EMG Using the Element Description Method

ISIE23-000333 Analysis of Latent Factors Affecting Video Game Performance Using Machine Learning Methods

ISIE23-000347 Design and Preliminary Evaluation of a Virtual Reality with Haptic Feedback Tool for Spatial Neglect Assessment and Rehabilitation

ISIE23-000371 Non-contact Physiological Monitor Based Fuzzy Control for Treadmill

Conference Welcoming Reception at Hanasaari Restaurant (Hanasaarenranta 5, 02100 Espoo).
Dress code : Business Casual

Chairs:
Wenbin Dai
Haibo Cheng

ISIE23-000401 Modeling Energy Consumption of Industrial Processes with Seq2Seq Machine Learning

ISIE23-000299 Automatic Microservice Orchestration and Deployment Method Based On the Modular Type Package for Industrial Edge Applications

ISIE23-000316 Improving the Execution Time of Industrial Applications through Planned Cache Eviction Policy Selection

ISIE23-000307 Collective Learning for Energy-centric Flexible Job Shop Scheduling

Chairs:
Claude DELPHA
Firdausa Ahmed

ISIE23-000135 Fault Severity Estimation in 7-Phase Electrical Machines in a Noisy Environment

ISIE23-000147 Hybrid Encoderless Control of Multi-Salient Induction Motors in Parallel Connection at Variable Flux and Torque

ISIE23-000150 Modelling a Rotor Bar of an Induction Motor for Improving Electromagnetic Torque and Efficiency Using Permeance–Based Equivalent Circuit Model and FEA

ISIE23-000157 Design and Analysis of A Highly Integrated Wireless Motor Drive System

ISIE23-000063 Model Predictive Torque Control of Synchronous Machines Without a Current or Stator Flux Reference Generator

Chairs:
Mihoko Niitsuma
Chung-Ta King

ISIE23-000166 Motion Planning of Fly-wing UAVs for Autonomous Landing in Cross-wind

ISIE23-000176 Development of Automatically Controlled Facial Osteotomy Robot using Force Information - For Safe Le Fort I Osteotomy -

ISIE23-000182 A Performance-Adaptive and Time-Monitored Autonomous Ticket Booking Service in Cloud

ISIE23-000193 Proposal of a Method for Measuring Inside Diameter of Tubes Using a Drive Unit of a Robot for Inspection of Small Tubes

ISIE23-000306 Distributed Formation Control and Dynamic Formation Transformation for Multi-vehicle Systems based on Virtual Leader-Follower Structure and Triggered Strategy

Chairs:
Amir Babaki
Anandarup Das

ISIE23-000036 A DC-DC Modular Multilevel Converter Topology with Single Arm for MVDC Railway Application

ISIE23-000049 Reverse engineering of the hydrogen system of a commercial fuel cell vehicle

ISIE23-000136 Dynamic Wireless Charging Using LCC-S compensation topology in Low and Medium Power Applications

ISIE23-000145 Optimal Components Sizing and Power Management for a Fuel Cell Electric Race Car Using a Bi-level Strategy

Chairs:
Ties van der Heijden
Ali Mehrizi-Sani

ISIE23-000105 Closed-loop simulation testing of a probabilistic DR framework for Day Ahead Market participation applied to Battery Energy Storage Systems

ISIE23-000149 High-performance IoT Module for controlling and testing PV panels

ISIE23-000155 Multifrequency Power Transfer in a Power Distribution Line

ISIE23-000210 Harmonic Interaction of Voltage Source Converters in Grid Parallel Operation

Chairs:
Danilo Caceres Hernández
Huei-Yung Lin

ISIE23-000096 Improving Vehicle Localization with Lane Marking Detection Based on Visual Perception and Geographic Information

ISIE23-000224 Walking Optimization for Humanoid Robots Combining Screw Algebra with Genetic Algorithm

ISIE23-000272 Real-time Dynamic Obstacle Avoidance For A Non-holonomic Mobile Robot

ISIE23-000132 Method of Artificial Vision in Guide Cane for Visually Impaired People.

ISIE23-000261 Asynchronous Multi-Task Learning Based on One Stage YOLOR Algorithm

Chairs:
Antonio J. Marques Cardoso
Rayane Mourouvin

ISIE23-000108 I/O-Linearization Based Current Decoupling Control of Modular Multilevel Cascade Converters

ISIE23-000119 Thermo-Electrical Modeling of Multilevel Switching-Cell-Array-Based Power Converters

ISIE23-000120 Variant Parameters Identification of the PEMEL Circuit Model by RMSE-Based Self-Tuning Method

ISIE23-000125 Improved Dead-Beat Control for Single-Phase LC-Coupling Hybrid Active Power Filter (LC-HAPF)

ISIE23-000160 An Efficiency-Enhanced LCC-S Based Inductive Power Transfer Converter Throughout Battery Constant Current Charging Process

Chairs:
Romain Delpoux

ISIE23-000055 Adaptive Low-Computation Neural Network Control of Constrained Nonlinear Systems and Its Application to Agricultural Drones

ISIE23-000060 Model Predictive Control Method for Nonisolated Universal Battery Charger

ISIE23-000116 Distributed Sensor Fault Detection for Sensor Networks

ISIE23-000205 Online Exciter Controller Tuning for a Synchronous Condenser in a Weak Grid

ISIE23-000227 Finite element dq-model for MTPA flux control of Synchronous Reluctance Motor (SynRM)

Chairs:
Makoto Iwasaki
Daisuke Chugo

ISIE23-000144 Finger Force Distribution Measurement System with Inclination Correction Function

ISIE23-000185 Estimating Changing Drive Timing Effects of Exosuit on Jumping Height for Augmenting Human Instantaneous Force

ISIE23-000304 Shoe-type Wearable Device for Measuring Ground Reaction Force and Center of Pressure

ISIE23-000335 Dominant Hand Invariant Parkinson’s Disease Detection Using 1-D CNN Model and STFT-based IMU Data Fusion

ISIE23-000354 Analysis of Rehabilitation Methods for Small Dogs Based on the Muscular Activity

Chairs:
Annukka Santasalo-Aarnio
Tatiana Liakh

ISIE23-000017 Parameter Estimation of Second-Life Lithium-Ion Batteries Through Subspace Identification Methods

ISIE23-000046 Unscented Kalman Filter based Coestimation of SoC and SoH in Lithium Battery with Hysteresis

ISIE23-000074 Optimized Passive Battery Cell Balancing Algorithm for a Low-Cost Race Car

ISIE23-000079 The in-plane thermal conductivity of lithium-ion cells: Parametric influences and simulative prediction

Keynote 2: The intelligent automation experience

Rikard Franz
Head of development department of Processing Automation, Tetra Pak, Sweden

Abstract:
Over the years, automation has improved performance in most production sites in the world and is actually seen as the 3rd revolution in the industry. The addition of the digitalization, has further improved the value of automation. As most people are currently wondering about how to make the best use of this we are thinking of how we can make the journey easier for people working with these solutions.

How can we make life easier for operators, maintenance people and managers. We have to add a new level to automation solutions, where things like UX and UI, linked to artificial intelligence will even further enhance the operations at production sites. Also, how can we make sure that Cyber Security threats does not put an abrupt end to this journey.

Speaker Bio:
With a long experience in Process Automation and manufacturing, Rikard is now heading the development department of Processing Automation at Tetra Pak, being an expert in plant control, monitoring, and automation services. After finalizing his master’s degree at Lund University, Rikard started to work with Automation as a programmer. Over the years, various positions in Project Management, automation sales and management has taken Rikard to the senior expert position he is having today.

Location : Sief @ Dipoli

Chairs:
José Daviu
Yannick Karekezi

ISIE23-000162 Quadratic Regression Model based Predictive Control of PMSM Drives with field weakening operation capability constrained to linear modulation range

ISIE23-000163 A PMaSynRM stator winding fault detection approach using an optimized PCA-based EWMA control scheme

ISIE23-000170 Dynamic Drive Cycle Model of a Fuel-Cell Powered Hybrid Bus

Chairs:
Amir Babaki
Anandarup Das

ISIE23-000285 Feasibility Study of Using Modified Single-Phase Wireless Power Transfer System for Three-Phases Motor Driving

ISIE23-000381 Tangentially-Magnetized-Slot-PM-Assisted Magnet Saturation Relieving Design for Doubly Salient Reluctance Machine Position Sensorless Drive Applications

ISIE23-000364 Staggered Ackermann Steering Geometry for Autonomous Driving of a Paired E-Scooter System

Chairs:
Jin Won Hwang
Chen-Wei Yang

ISIE23-000225 Phase-independent control of a three-phase four-leg inverter

ISIE23-000265 Exploration of For-Purpose Decentralized Algorithmic Cyber Attacks in EV Charging Control

Chairs:
Rayane Mourouvin

ISIE23-000173 Input Impedance Modeling of Dual-Active-Bridge-Based Input-Series Output-Parallel Converters

ISIE23-000177 Basic Study of a Heat Distribution Control Method for an Induction Heating System with Three AC-AC Direct Converters

ISIE23-000181 A Detection Method of Misalignment for a WPT System using Three-Power Transfer Circuits

Chairs:
Kim Fung Tsang
Majid Sorouri

ISIE23-000363 FIWARE-based Architecture for Smart Local Energy Communities

ISIE23-000373 Black Soldier Fly Bioconversion System: A Digital Twin Approach

ISIE23-000374 Detection of Powdery Mildew Pest in Apple Tree Leaves Using Deep Learning in Intelligent Sprayer Robots

Chairs:
Romain Delpoux
Jiarui Zhang

ISIE23-000257 Flatness-Based Control for Transient Current Suppression in a Dual Active Bridge Converter

ISIE23-000283 Analysis of the zero dynamics of three-phase current source inverters using a complex-valued approach

Chairs:
Tomoyuki Shimono
Tomoya Kitamura

ISIE23-000194 Verification of Anode Position and Generated Force Vector of EHD at Wire-cylinder Electrode

ISIE23-000195 Development of Optical Proximity/Biaxial Force Sensor and Application to Contact Movement

ISIE23-000208 Handheld Haptic Drill Simulator Using Visual Servoing System for Axial Force Presentation

Chairs:
Kanghyun Jo
Marta Marrón

ISIE23-000385 Accurate RF-sensing of complex gestures using RFID with variable phase-profiles

ISIE23-000386 Work-in-Progress: Multimodal Odour and Image Recognition on Synthetic Dataset

ISIE23-000183 ARTriViT: Automatic Face Recognition System Using ViT-Based Siamese Neural Networks with a Triplet Loss

Chairs:
Polina Ovsiannikova
Christoph Binder

ISIE23-000152 From Model to Implementation: Engineering of flexible Production Systems with RAMI 4.0

ISIE23-000196 Onsite Renewable Generation Time Shifting for Photovoltaic Systems

ISIE23-000282 Method for Automatic Simulation Model Calibration and Maintenance for Brownfield Process Plants

Chairs:
Maria Carmela Di Piazza
Kostas Siozios

ISIE23-000216 ANN-based forecasting of solar irradiation under data clustering: an approach for improved estimation of PV power production

ISIE23-000220 ICE: A Low-Cost IoT Platform Targeting Real-Time Anonymous Visitors Flow Tracking at Museums

ISIE23-000244 Embedded Intelligence of End Devices with MOS Sensors for CH4 Detection

ISIE23-000297 Evaluation of AIoT-based Smart Lighting System: An IDex Case Study

Chairs:
Kanghyun Jo
Jie Liu

ISIE23-000352 Classifying Breast Cancer Histopathological Images Using Attention Guided Convolutional Neural Network

ISIE23-000061 Attack prevention and detection for cyber-physical systems based on coprime factorization technique

ISIE23-000088 An Interoperability Middleware for IIoT Gateways

ISIE23-000154 Sustainability of ICPS from a Safety Perspective: Challenges and Opportunities

ISIE23-000279 Cybersecurity of Industrial Automation and Control System (IACS) Networks in Biomass Power Plants

Chairs:
José Daviu
Yannick Karekezi

ISIE23-000171 Modeling and Experimental Validation of a LTO Battery Cell for a Hydrogen Hybrid Bus

ISIE23-000180 Comparative Study of Excitation Signals for Active Fault Diagnosis of Belt Drives

ISIE23-000198 Influence of the Flux Sensor Position for Rotor Fault Detection in WRIM: A Power Spectral Entropy Analysis

ISIE23-000270 Design and Performance Optimization of a Novel High Temperature Superconducting Linear Flux-Switching Motor

ISIE23-000280 Automatic classification of stator asymmetries and insulation thermal damages in induction motors, applying persistence spectrum and a convolutional neural network to the stray-flux signals

ISIE23-000287 Sensorless Control Strategy for Magnetic Drive-Trains Based on Adaptive Nonlinear State Observer

Chairs:
Majid Sorouri

ISIE23-000010 API for data transfer using USB to CAN converter

ISIE23-000053 Decentralized Motion Control for a Novel Planar Motor Intralogistics System

ISIE23-000058 Learning Diverse and Efficient Goal-reaching Policies for Robot Motion Planning

ISIE23-000159 Extending Edge-Based Mobile Robot Navigation with Social Awareness

ISIE23-000360 Fuel Economy Simulation and Development of an Online Data Acquisition System with HIL Method for a VW Crafter Hybrid Car

Chairs:
Jin Won Hwang
Chen-Wei Yang

ISIE23-000289 On interoperability of Datacentre and the Energy market in the Nordic Region

ISIE23-000292 An emulator for static and dynamic performance evaluation of small wind turbines

ISIE23-000312 Mapping the Optimal Sites for Offshore Wind Power Plants and Green Hydrogen Production: South and Southeast Brazilian Case Study

ISIE23-000313 A low-cost digital twin for real-time monitoring of photovoltaic panels

ISIE23-000323 Photovoltaic and Wind Power Plants Production Profiles Generation from Scarce Data

ISIE23-000325 Fast Earth-Fault and Feeder Detection in Medium-Voltage Distribution Power Grids

Chairs:
Alvaro Iribarren
Rayane Mourouvin

ISIE23-000281 Voltage Balancing Analysis of DC-Link Capacitors in Six-phase Three-Level T-Type Inverters

ISIE23-000338 Choke-less Class-E Oscillator Using p-MOSFET and n-MOSFET

ISIE23-000346 A Novel Technique to Mitigate the Overlap-Time Effect in Current Source Inverters

ISIE23-000253 Small-Signal Stability Analysis of Power Converters with Optimal Pulsewidth Modulation Strategies

ISIE23-000039 Wireless Power Transfer with Resonant Pulsed Current Converter

ISIE23-000082 Enhancement of Steady State Response of Indirect Finite Control Set Model Predictive Control

Chairs:
Zaixin Song
Chunhua Liu

ISIE23-000218 Optimization design of permanent magnet synchronous motor torque ripple based on stator tooth crown slotting method

ISIE23-000234 FPGA Validated Advanced Learning-based Voltage Control of DC/DC converter feeding CPL in DC Microgrid applications

ISIE23-000250 Design Considerations of Outer-Rotor Flux-Modulated Permanent-Magnet In-Wheel Motors

ISIE23-000266 A Fast Low-Cost Neuron Network Controller with Ripple Suppression Based on Model Predictive Direct Speed Control with Continuous Control Set and Long Horizon

ISIE23-000288 Overshoot Reduction Inspired Recurrent RBF Neural Network Controller Design for PMSM

ISIE23-000142 Design of A Novel Double-Stator Fault-Tolerant Transverse Flux Permanent Magnet Machine for Electric Propulsion Aircraft

Chairs:
Tomoyuki Shimono
Tomoya Kitamura

ISIE23-000211 Model-Based Pitch Angle Compensation for Center of Gravity Variation in Underactuated System with an Arm

ISIE23-000213 Frequency-Domain Modeling-Free Iterative Learning Control for Point-To-Point Motion

ISIE23-000286 Universal Motion Controller: Adaptive Approach

ISIE23-000300 Underactuated Control for Two-Wheeled Mobile Robot with an Arm Using Torque Constraint Conditions and Disturbance Observer

Chairs:
Alin Tisan
Óscar Lucía

ISIE23-000305 Rapid FPGA implementation of a cost effective quaternion LMS estimator

ISIE23-000350 DenseNetx: Efficient DenseNets for Remote Scene Classification without Pretraining

ISIE23-000353 Classification of Lung and Colon Cancer Histopathological Images Using Attention Based Convolutional Neural Network

ISIE23-000189 Vibration Auralization System Using High-Speed Vision

ISIE23-000190 A Comparison of Extended Kalman Filters for Parameter Estimation of Sinusoidal Signals

ISIE23-000207 Unifying Local and Global Fourier Features for Image Classification

Chairs:
Kanghyun Jo
Nishan Mills

ISIE23-000291 Driving Profile Analysis Using Machine Learning Techniques and ECU Data

ISIE23-000314 Formal verification of observers supervising a cyber-physical system implemented using IEC 61499

ISIE23-000318 Methods of data streaming from IEC 61499 applications to Cloud storages

ISIE23-000321 Efficient Multi-Receptive Pooling YOLOv5 with Coordinate Attention Module for Object Detection on Drone

ISIE23-000322 A Cybersecurity Framework for Home Energy Management Systems using Artificial Intelligence

ISIE23-000324 Concept of blockchain based micro-service control strategy for a domestic water heater

Chairs:
Daisuke Chugo
Makoto Iwasaki

ISIE23-000365 Feasibility of Smartphone-Attached UWB Tag for Daily life Indoor Pedestrian Tracking

ISIE23-000378 Disturbance rejection for pedaling rehabilitation robot based on integration of equivalent-disturbance-rejection and repetitive control methods

ISIE23-000396 Cognitive assistance for the visually impaired using haptics presentation of environmental information

Gala Dinner at Pikku Finlandia / Little Finlandia Hall (Mannerheimintie 13 E, 00100 Helsinki)
Dress code : Business Casual

Chairs:
Frank Wasinski
Kazi Jabed Akram

ISIE23-000080 Concept of an Optical Distance and Speed Sensor Using Novel Offsetless Spatial Frequency Filters in the Area of Functional Safety

ISIE23-000138 Experimental Qualification of a Low-Noise Charge-Sensitive ROIC with Very High Time Resolution

ISIE23-000228 Capacitive Sensor-based Smart Water Tap: A Feasibility Study

ISIE23-000034 Physics-data cooperative ship motion prediction with onboard wave radar for safe operations

Chairs:
Jin Kwon Hwang
Maximilien Marc

ISIE23-000277 Frequency-Domain System Identification of a First Order Governor-Turbine Model from PMU Ambient Data

ISIE23-000369 On the Relationship between Inter-Area Modes and Power System Inertia

ISIE23-000382 LVDC vs LVAC: A comparison of system losses

ISIE23-000345 An Unbiased Fuzzy Double Q-Learning based Energy Management for Fuel Cell Hybrid Electric Vehicles

Chairs:
Nishan Mills
Harsha Moraliyage

ISIE23-000326 Automated Machine Learning in Critical Energy Infrastructure for Net Zero Carbon Emissions

ISIE23-000327 Tiny Federated Learning with Bayesian Classifiers

ISIE23-000330 Debugging approach for IEC 61499 control applications in FBME\

ISIE23-000336 Augmenting Industrial Chatbots in Energy Systems using ChatGPT Generative AI

Chairs:
Rayane Mourouvin
Hirotaka Koizumi

ISIE23-000209 Fault-Tolerant Active Neutral-Point-Clamped Multilevel Inverter Maintaining Output Voltage at Failure

ISIE23-000214 Selective harmonic mitigation-pulse amplitude modulation technique for 7-level inverters

ISIE23-000217 SiC JFET/P-MOSFET cascode for SSCB and inrush current limiter in 300V DC power systems

ISIE23-000245 MODELLING AND CONTROL OF MULTI-PORT DC-DC CONVERTER FOR OFFSHORE WIND-HYDROGEN ENERGY SYSTEMS

ISIE23-000273 Multi-Objective SHM-PWM Modulation Technique for CMV Control in 3-Phase Inverters

Chairs:
Dirk BENYOUCEF
Djaffar OULD ABDESLAM

ISIE23-000037 An Efficient Adaptive Algorithm for Batteries Charging Supplied by Photovoltaic Panels

ISIE23-000093 A New Optimal Centralized Demand Side Management for a Campus Smart Microgrid

ISIE23-000161 LSTM Networks for Cyber-physical Attack Diagnoses in Microgrids

ISIE23-000238 Model-Free HVAC Optimizer based on Reinforcement Learning

ISIE23-000264 Local Energy Marketplace Agents-based Analysis

Chairs:
Hadi Kanaan
Romain Delpoux

ISIE23-000050 Analytical Model and Control Strategy for Three-Phase Single-Stage Rectifier for Battery Charging Applications

ISIE23-000126 Review of Different Current Control Strategies for Thyristor-Controlled LC-Coupling Hybrid Active Power Filter

ISIE23-000197 Attenuation of Voltage Distortion Effects on a Three-Phase Grid-Connected Converter

Chairs:
Rayane Mourouvin
Hirotaka Koizumi

ISIE23-000260 Asymmetrical firing angle modulation for 12-pulse thyristor rectifiers supplying high-power electrolyzers

ISIE23-000267 Modeling a Grid-Forming DFIG Wind Turbine

ISIE23-000268 Switching control to enhance performance in smart protections

Chairs:
Sandun Mavikumbure
Harsha Moraliyage

ISIE23-000341 Application of Deep Learning Method to Estimate Bottomhole Pressure Dynamics of Oil Wells

ISIE23-000344 Towards migration from IEC 61131-3 to IEC 61499 in process industry: redesign of visualisation

ISIE23-000349 Physical Anomaly Detection in EV Charging Stations: Physics-based vs ResNet AE

Chairs:
Nader Safari-Shad
Bruno oliviera de sousa

ISIE23-000395 Online Parameter Estimation of Dual Three-Phase Permanent-Magnet Synchronous Machine for More-Electric Aircraft Applications

ISIE23-000158 An Investigation into Permanent Magnet Hysteresis Losses in Reverse-salient Permanent Magnet Synchronous Motors

ISIE23-000400 Transient Thermal Analysis of Totally Enclosed Railway Traction Motor with high power density

Location : Sief @ Dipoli

Keynote 4: The digital twin: The why and the how

Alexander Fay
Professor and Head of the Institute of Automation Technology, Helmut Schmidt University, Germany

Abstract:
Digital Twins have gained increasing interest during the last years. Various concepts and technologies exist for the implementation of Digital Twins, and their possible applications are multifold. Beyond promising perspectives, companies long for advice where they should start with applying Digital Twins: should they build Digital Twins to support their development processes, or their production? Or rather Digital Twins of their products, for better maintenance and update services? Should they restrict access to these Digital Twins to own staff, or can Digital Twins offer new perspectives also for their customers? Furthermore, Digital Twins will be gamechangers for lifecycle services. New business opportunities arise, and thus, new players. Who will be the owner of the Digital Twin and the data it comprises and generates? Which capabilities are required to make use out of it? How will this change the value chain of engineering and operation of systems in production, logistics, transport and energy distribution? These questions are the subject of this keynote, and methods how to find answers, individually for one’s business: How to position in future in the value chain, how to identify attractive applications of the Digital Twin, how to identify which information is required to set up a Digital Twin, and how to make best use of standards and existing information.

Speaker Bio:
Alexander Fay (IEEE Member’02, Senior Member ’07) is Full Professor and Head of the Institute of Automation Technology at the Helmut-Schmidt-University in Hamburg, Germany. His main research interests are models and methods for the engineering of large automated systems, especially in the process and manufacturing industries, in buildings and transportation systems. With his research team, he develops and employs knowledge-based methods, ontologies, autonomous systems and other AI techniques. The aim of his team is to develop models, methods and tools to increase engineering efficiency and to assist in the engineering and operation of industrial plants. He is member of the Scientific Board of the German Society for Measurement and Automation (GMA) and Head of its Department “Methods of Automation”. He was a member of the IEEE Industrial Electronics Society Administration Committee between 2009 and 2011. Between 2009 and 2017, he served as an Associate Editor of IEEE Transactions on Industrial Informatics. Alexander Fay is a member of acatech, the German Academy of Engineering Sciences. Since 2014, he has been a member of the Scientific Advisory Board and of the WG 2 “Research and Innovation” of the German “Industrie 4.0” initiative.

Chairs:
Raine Viitala

14:30-14:50 Jouni Aro -- Prosys OPC Ltd : "OPC UA based data harmonization"
14:50-15:10 Gerardo Santillan -- Semantum Oy : "Experiences with industrial interoperability standards and Model Broker"
15:10-15:30 Veikka Pirhonen -- Siemens : "Energy Flexibility Management - Platform, Solutions and Services"

Chairs:
LARISA DUNAI
Kostas Siozios

ISIE23-000203 Modeling and Control of Differential-Drive Chassis for a Homecare Assistive Robot

ISIE23-000362 Headset gas sensor for monitoring of blood EtOH

ISIE23-000372 Architecture of a Feedback System for Human-Machine Interaction in a Collaborative Environment

ISIE23-000380 Perturbation Device for Crutch Walk Training

Chairs:
Sally Sajadian
Hadi Kanaan

ISIE23-000246 Performance Comparison of Modulation Techniques for Modular Multilevel Converter

ISIE23-000274 High-Dynamics P-E and Q-f Control of PV Inverters for Strong and Weak Grids

ISIE23-000294 Modified Model Predictive Control for Power Balancing in Multilevel Inverter for Battery Energy Storage Applications

ISIE23-000319 Improved Transient Response in Inverter-Based Resources using Deep Reinforcement Learning

Chairs:
Keith Corzine
Naira Goñi

ISIE23-000084 Fault Detection, Localization and Clearance for MMC based on Indirect Finite Control Set Model Predictive Control

ISIE23-000248 A orientation tolerant wireless power transfer system using bipolar coil topology

ISIE23-000361 Demonstration of On-road Vehicle Drive with Electric Motor Fed by Power Packets

ISIE23-000390 High-fidelity averaged model of grid-following inverter for stability analysis considering the PLL influence

ISIE23-000397 A Z-Source Ac Circuit Breaker

Chairs:
Alexander Fill
Jan Haase

ISIE23-000258 Temperature Indicators and Overtemperature Detection in Lithium-Ion Batteries based on Electrochemical Impedance Spectroscopy

ISIE23-000259 Onset of Irreversible Reactions in Overcharging Lithium-Ion Cells: an Experimental and Modeling Approach

ISIE23-000332 Integrated Lithium-ion battery model and experimental validation of a second-life prototype

ISIE23-000337 Survey on Current Large-Scale Energy Storage Systems

ISIE23-000115 Charging Control of A Vanadium Redox Flow Battery Integrated With Solar PV Plant

Chairs:
Cecile Maillard-salin

Speaker : Lacra Pavel (University of Toronto, Canada)

More info on: https://iten.ieee-ies.org/upcoming-online-webinar/2023/extraordinary-women-in-ies-webinar-on-nashs-game-theory-over-networks-by-lacra-pavel/